This product is restricted for sale in the communist state of California. If your shipping address is located in a restricted state, (ex. CA, NJ) we will CANCEL your order and CHARGE A RESTOCKING FEE. Check your state's restrictions on this item before proceeding with your order. We are not responsible for knowing your state's restrictions prior to any purchases of rifles, handguns, or magazines.
This is our FU "Go-Bag", featuring our FU FUCA-15 SBR with an 8" barrel and folding stock, the Wolfpack Armory Disruptor 36 suppressor with Breek Arms' quick-detach Breek-Lok mechanism. We also added to the rifle a Riton X1 Tactix Red Dot Sight, a Magpul vertical foregrip, and an extra Lancer L5AWM 20rd magazine to fit loaded in the backpack along with the standard 30 round the rifle normally comes with. All this and more fits in the included Vism backpack so you can always be ready when you really need it the most.
SBR Description:
This rifle is a FUCA-15 short barrel rifle that was made by Firearms Unknown.
Here is the parts list:
Upper Specs:
Forged 7075 Upper, M4 Feed ramps, Type III Hard coat anodized
Blitzkrieg Tactical Black Nitride, M16 Bolt Carrier Group (BCG)
Billet Charging handle with mil-spec latch
8", 4150v, 5.56x45mm (5.56NATO) chambered Barrel, pistol gas system, 1:7 Twist, Black Nitride Treated
Steel, Black Nitride Treated low profile gas block
Stainless Steel carbine-length gas tube
7" BT Gestalt Hand-Guard, M-Lok
Bird Cage Flash Hider
Lower Specs:
FUCA-15, Forged 7075 Lower Receiver
5.56 carbine Buffer System
Blitzkrieg Tactical, mil-spec lower parts kit
Blitzkrieg Tactical Freyr Match Trigger
Blitzkrieg Tactical Osprey Ambi Selector
Blitzkrieg Tactical (BLK) Ergonomic Grip
Black Metal MFT Minimalist with Law Tactical Side Folding Stock adapter.
This rifle comes with the following items: (1) Rifle, (1) Cable Lock, (1) Sticker, (1) Firearms Unknown Warranty Certificate, (1) MFT Magazine, (1) Hard Rifle Case
Test Fire: This rifle is test fired and maintains the Firearms Unknown lifetime warranty (see below for warranty details).
California Compliance: This rifle is being NOT being sold as a California Compliant rifle.
Firearms Unknown and Blitzkrieg Tactical firearms come with a limited lifetime warranty. For details on the warranty click here: Firearms Unknown - Legal Disclaimers & Warranty Information - Firearms Unknown
Suppressor Description:
Constructed from high-quality materials, the Disruptor K is built to withstand the toughest conditions while remaining light enough for easy maneuverability. Whether you're out hunting or practicing at the range, this suppressor will keep your shots quiet without sacrificing accuracy. With its advanced design and engineering, the Disruptor 30 is the perfect addition to any firearm for those looking to reduce noise and maintain precision. Upgrade your shooting experience with the Disruptor 30 and enjoy a quieter, more controlled shooting experience.
The blast chamber is threaded 1.375"x24 so all HUB threaded adapters will work on the Disruptor 30. Available with a Plan B adapter with Night Howler flash hider (5/8x24).
Caliber: Up to .358 Cal. (9mm)
Weight: 10.9oz. (Excluding mounting adapter)
Length: 6.25"
Diameter: 1.61"
Material: 17-4 Stainless Steel
Construction: Fully tig welded
Finish: C Series Cerakote
Warranty: Lifetime
Breek Arms Breek LOK 3QD Suppressor Mount Description:
Designed to work with most 1.375x24 HUB-compatible suppressors, the Breek-LOK 3QD
system streamlines the attach-detach process into a matter of seconds. To mount your suppressor,
simply:
- Insert the Muzzle Device into the HUB: Align the muzzle device lugs with the HUB’s
corresponding engagement points.
- Engage with a Push and a Twist: Depress inward and rotate the HUB 60° clockwise.
This motion guides the lugs into their locked position.
- Secure the Tapered Seat: Complete an additional half rotation. This ensures the HUB’s
internal taper seats firmly against the corresponding taper on the muzzle device,
establishing a secure lock-up.
The Breek-LOK 3QD system’s two primary engagement points—the tapered seating surface and
the locking lugs—provide a rock-solid mounting interface designed for consistent, repeatable
performance. Whether you’re removing your suppressor for storage, transport, or barrel
maintenance, the HUB ensures that when you reinstall, the suppressor returns to the exact same
position. This repeatability eliminates the guesswork and subtle point-of-impact shifts often
associated with repeatedly mounting and dismounting suppressors, ultimately saving you time,
ammunition, and frustration.
- Speed: Mount or remove your suppressor in a matter of seconds without tools or intricate
manipulation.
- Simplicity: A straightforward push, twist, and pull-forward action is all it takes.
- Stability: Tri-lug engagement and a tapered lock-up deliver uncompromising
alignment and accuracy.
- Lightweight Durability: Aerospace-grade titanium construction means minimal added
weight and maximum strength.
- Compatibility: Designed to fit most suppressors that utilize the industry-standard
1.375x24 HUB interface.
Optic Description:
Detailed Product Features:
- 1 MOA Windage and Elevation Adjustment
- 6 Levels of Red Illumination Featuring On/Off Between Each Level
- 40,000 Hours Battery Life
- Assembled in EP-Level Clean Room
- 100% Waterproof, Fog proof and Shockproof (tested up to 1200 G’s)
- Aircraft Grade Aluminum with Rugged Design Ready for the Toughest Environments
Technical Specifications:
| Magnification: |
1 |
| Parallax Adjustment: |
Fixed at 50 yards |
| Objective Lens Diameter: |
23mm |
| Lens Coating: |
Fully Multi-Coated, Full Wide Band, Waterproof Coated, Low Light Enhancement |
| Material: |
6061-T6 |
| Eye Relief: |
Unlimited |
| Click Value at 100 yds/mm: |
1” |
| Adjustment Range: |
120 MOA |
| Length: |
2.48in/63mm |
| Weight: |
3.5oz/100g |
| Included Items: |
Flush Mount, Lower 1/3 Co-Witness QD Mount, Lens Covers, Lens Cloth and Allen Wrench |
Other Descriptions:
The Breek-LOK 3QD Pyre Single-Port Muzzle Brake reduces recoil and muzzle rise through 90° blast-vectoring ports, enabling rapid, accurate follow-up shots. Less blowback
improves shooter comfort, critical for competitive or defensive scenarios. Its sleek, compact
design complements any build—ideal for SBRs or pistol-caliber carbines—while maintaining a
clean, refined appearance.
SPECS
- Breek-LOK 3QD Compatible
- Design: Pyre
- Material: 4140 Hardened, Nitride
- Overall length: 1.6 Inches
- Weight: 1.7 oz (223/556)
- Peel Washer Included
- Designed & Manufactured in America
Lancer set out to engineer a better magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one-piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use. The internal geometry of the Advanced Warfighter Magazine is a constant curvature utilizing a non-tilting follower for reliable feeding. The body and component materials are corrosion and chemical resistant, passing military chemical testing.
- 20 - Round Capacity
- Hardened Steel Feed Lips
- Non-Tilt Follower
- Stainless Steel Spring
- Aggressive Texturing
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.
- High strength polymer verticle grip
- Reliable attachment to 1913 Picatinny rails
- Low profie design
- Ergonomically designed
- Aggressive texture for positive weapon control
Made in U.S.A.
- The Small Backpack has a Main zippered compartment of 669 cu. in. of space, with an internal zippered pocket.
- The Middle zippered compartment of 330 cu. in. of space, with three internal pockets.
- The Top front pocket (70 cu. in) has a loop fastener strip on the outside for name tapes and/or moral patches.
- The Bottom front pocket (175 cu. in.) and the sides of the backpack have MOLLE compatible webbing to make the Small Backpack a modular system.
- The backpack also has a large Padded Hydration Bladder compartment on the back with a hook and loop enclosure.
- Other features include: adjustable padded shoulder, waist, and sternum straps with quick connect buckles, adjustable compression strap, and a top heavy duty carrying handle.
- Other features include: adjustable padded shoulder, waist, and sternum straps with quick connect buckles, adjustable compression strap, and a top heavy duty carrying handle.
- This is a Small Backpack with a ton of storage space for its size with many compartments and pockets to help organize your gear.
